PE-HD-PIPES (HDPE PIPES)
INTRODUCTION
PE - HD - PIPES (HDPE PIPES) have been used for piping system
in various industries primarily because of its excellcnt resistant
tocorosive chemicles, its inherent toughness and ease of installation.PE
- HD - PIPES (HDPE PIPES) is definitely not a substitute for
conventional pipes but is actually a superiority of PE - HD
- PIPES (HDPE PIPES) are especially proven in the many properties
FLEXIBLE
Jyoti pipes have a high flexible impact strength which enables
them to withstand momentary, higher pressures
( caused by water hammer, etc.) than their rated capacity.
The Flexibility of the pipes also enables them to be laid
without leveling trenches since they can.
DURABLE
Jyoti pipes manufactured are designed
for a working life of 50 years at 27 c and the rated pressure.
They are designed for a stress of 50 kgf/ cm which with a
safety factor of 1.3, permits a working stress of 39.5 kgf/
cm. The pipe grade HDPE used includes ultraviolet absorbers,
antitoxins and additives to prevent the degradation of the
pipe due to weather.
POWER-SAVING
Encrustration is virtually nil in jyoti pipes resulting in
tremendous energy savings, since pumping cost remains the
same throughout the operating span. The smooyher flow results
in shorter pumping times with resultant savings in electricity.
It also enables a smaller dia pipe to be selected for the
same flow, compared to metal pipes.
CORPOSION-RESISTANT
Jyoti pipes are non-corrosive and are impervious to any aggressive
soil or water conditions. Their paraffin structure gives them
a high degree of resistance to chemical attack; consequently
they are insoluble in practically all chemicals at room temperatures,
making them the ideal choice for chemical industries.
EASY TRANSPORTABILITY
Jyoti pipes can be extruded in any continuons length. Pipes
of smaller diameters can be coiled by the kilometer while
larger diameter pipes can be cut into lengths of the most
economic transportable size, to be butt welded together at
the installation site
To A SMOOTH
Jyoti pipes have a smooth outer and inner surface. The coefficient
of friction ( C factor ) of 150 as per Hazen Williems formula
is constant throughout the life of the pipe as compared to
a 'C' factor of 100 for metallic pipes.
ABRASION-RESISTANT
The resuts obtained in foreign countries from many different
tests have shown that HDPE pipes may be included in the category
of abrasion-resistant materials.
APPLICATION
Effluents and waste water disposal
Domestic gas distributions
Submarine pipelines
Agriculture
Potable water supply
|